How old is my getzen trumpet

Other common metals for trumpets are nickel silver mainly for slides and sterling silver a favored metal for bells.

Whether a player goes with a lacquered or silver-plated finish will come down to personal taste - many pros agree that silver-plated trumpets have a brighter sound compared to the darker tone of trumpets with lacquered finishes.

Today's line of student, intermediate and professional trumpets is extensive - some respected manufacturers include Bundy, Verve, Yamaha, Allora, Bach, Getzen, Conn and Schilke. Skip to main content Skip to footer. Put the ring on the leadpipe just below the nut. This will definitely prevent the leadpipe from ever getting stuck again. Our trial period is effective for those who order directly from Edwards US.

All distributors set their own trial period policy. Instruments obtained via a phone or internet order have a two week trial period that starts upon receipt of your shipped instrument. During this time, you may return all or part of your order. Any merchandise being returned must be sent back in the condition in which it was received. In the case of credit being issued for a return item, any damage will be deducted from the credit total. In order to take part in the trial period, you will need to place a deposit for the entire purchase amount of the instrument or component s.

We accept all major credit cards, personal checks, or money orders. The customer is responsible for shipping to and from the factory.

Please visit our online store to purchase instrument components and accessories. We will be more than happy to assist you swiftly in your needs. Although we have been a strong contributor to the development of modular instruments, we exist and design all of our parts to complement the complete Edwards trombone or trumpet. The nut that your fingers come in contact with, when you are screwing in the leadpipe is set with grooves and ridges.

The number of grooves notes the leadpipe:. Our trombone bell numbering system has no hidden code for deciphering the bell characteristics. The numbering system is a code for our factory that relates to a build sheet on what should be done to that particular bell. The only order to the system is if you take a yellow brass bell, subtract one number, you end up with a rose bell, subtract 2 and you have a red brass bell.

All three bells are tempered and have an unsoldered rim, just different material composition. Translating a trumpet bell number is quite simple.

Please understand that over time this system has been added to and may not be consistent with our early products. The thickness of the bell material we use is measured and referred to as gauge. We offer 20 thickest 21, 22, and 23 lightest gauge. In the world of large bore tenor and bass trombones, valves are a big factor in determining the sound and response of an instrument. Using the Thayer valve, Edwards has always pioneered improvements in valve technology. Our competitors have tried time and again to improve upon the original design, yet the Thayer remains the industry standard as the other valves come and go.

In order to understand valves you must first examine the tubes leading in and out of the valves. Conventional rotor designs direct the air 90 degrees to the right and then through the wrap before the air bends another 90 degrees into the neck pipe. This second degree turn is achieved only if the valve knuckle is set correctly. On certain trombones the knuckle comes in straight from the top parallel with the neck pipe , which causes the air to bend degrees.

This brings us to an essential point — the most important trait of a good valve is the ability for a player to sound the same on the open horn and when the valve is depressed. While good in theory, venting a valve in between the ports can cause half-valved effects. Even more importantly, it can cause airflow interruptions and disrupt the aperture of the player.

As a result, technical valve passages become all valve noise and note lengths are compromised, leaving more articulation and air than tone. Now add another valve for bass trombonists and the problems with this design are magnified.

Certain vented rotors also present the player with mechanical problems. On these valves, one needs to be careful with the removable bearing plates. If the valve with the stop arm mounted to it moves the ports will move as well. The ports will then be stuck in purgatory, no longer engaged or not engaged i.

Traditional conventional rotors have the bearing plate with stop arm assembly soldered in place. With this design, the bearing plate presses in on just one side, leaving the stop arm in the correct position.

As a result, your ports will always line up correctly with the valve knuckles. The beauty of the Thayer valve is that the air only bends 30 degrees when you engage the valve. The disruption is the least of any valve on the market and leaves the player with a very natural sounding — and feeling — instrument. The largest bend is on the backside of the wrap where the tubing goes back into the Bb side of the horn. Even with this turn in the wrap, the Thayer valve still allows the player to color the trigger-side notes and even increase the breadth of the notes in the extreme low register.

No other valve on the market will allow you to do this. At Edwards, there are certain tolerance allowances we maintain in manufacturing our Thayers in order to keep each valve moving smoothly. There is a balance in valve tolerances.

It takes about seven times longer to build a hand-hammered bell, so these bells are used in the more expensive professional instruments. They give an instrument more character, individuality, richness, depth, and overtones. When the company hires someone new, it is a considerable investment because everyone has to be fully trained. When people struggle to learn a particular job, the company trains them in a new task to see if they have more of a facility for one job over another.

Getzen employs about people total with 78 working in the factory. While the majority of the metal used in building the instruments is brass, nickel is often used where extra strength is needed, such as for pistons and inner slide tubes. The nickel is then usually plated with nickel-silver. Different shades of brass are sometimes used as well.

A red brass which contains more copper, for example, produces a warmer sound. The Getzen Company has an affiliated organization called Edwards Instrument Company which makes higher-end, specialty-type instruments. Edwards provides musicians with a near-custom instrument for less money and less time than a fully custom instrument. We combine the possible options of different thicknesses of the metal of the bells, different tempering, and different finishes.

There are 1. Edwards works with musicians to fine-tune an instrument for their personal taste. The company's personnel start with a certain kind of lead pipe and bell, and the musician might say, "I wish it sounded a little bit darker.

While Edwards sells directly to the customer, the Getzen Company only sells wholesale to dealers. Still, Getzen sometimes works with musicians to design its instruments. Manufacturing Getzen Recycles. All of our cardboard, plastic, and aluminum is bundled in-house and sent to a recycling plant in an effort to eliminate as much landfill waste as possible. Videos Brazing Trumpet Valves.